Gieskes.nl/SHOP

Wavetable-Radar

This is a WTR, for more info go here

connections:
- line out.
- midi in.
- dc power jack in (needs 9V DC).

costs:
- WTR assembled: 99,- euro.
- WTR kit: 45,- euro.
- WTR PCB: 8,- euro.

shipping:
- depends.

Tiny-WTR

This is a WTR, for more info go here

specs:
- 3-Bit DAC op amp buffered output.
- 512 step wavetable.
- 64 steps sequencer.
- +/- 3.7 octave range.
- set sequencer length and vibrato speed (by holding the button down during power up)

connections:
- line out (also works with headphone)

costs:
- WTR assembled: 20,- euro

shipping:
- depends.

TVSCV1b

- kit 45,- euro.
- build: 70,- euro.
- build with back panel: 80,- euro.

only tested for pall but should also work on ntsc.

shipping costs depends on country.

specs:
- 2 CV out 10bit resolution
- trigger in.
- 16 steps a bank a channel
- 4 banks a channel

specs:
- PAL (NTSC unconfirmed)

connections:
- DC +)- 9V
- composite video out RCA jack

link:
- TVSCV

HSS3j

more info: HSS3j.

features:
16 selectable audio/video synths
8 video synths
analog lowpass filter.
composite out, NTSC or PAL.

Connections:
- line in (can take any signal from 0V to 12V)
- line out
- midi in
- trigger out
- trigger in
- ir in
- ir out
- composite video out.

Kit 69,- euro. (looks like this)
Kit with video converter: 94,- euro.

Assembled only audio: 100,- euro. (looks like this)
(build with aluminum back panel, has all inputs and outputs but no video features).
For the only audio option you can choose between 2 options of sounds.

option A:
http://vimeo.com/10650308
http://vimeo.com/10415305

option B:
http://vimeo.com/11426693
http://vimeo.com/33896077

Assembled with video out: 150,- euro. (looks like this)
(build with aluminum back panel, has all inputs and outputs including the video features).

Shipping: depends.

HSS2g

HSS2g.

- video of HSS2g with DEP2a
- video tutorial of the HSS2g

connectors:
- line out.

runs from 9v battery.

built: 50,- euro.
kit: 30,- euro

shipping depends

Gameboy-Brick

The gameboy brick is just like a real brick, you could even use it to build a house..
more info can be found gb-brick

The bricks cost: 15,- euro
Shipping costs are between 8,- and 25,- euro, depending on country and shipping type.

GVS1c

- kit 55,- euro.
- build: 85,- euro.
- build with back panel: 95,- euro.

tested only to work with:
- Korg Kross Four
- Panasonic AVE5
- 1T TBC

shipping costs depends on country.

specs:
- 1 BIT video sampler
- resolution 128x96
- lowpass filter on video (for analogue/antialias look).

specs:
- PAL or NTSC.

connections:
- mono jack 3.5mm audio/trigger in
- DC +)- 9V
- composite video in RCA jack
- composite video out RCA jack

link:
- GVS1
- GVS1c manual
- GVS1c assembling instructions

GVM1

GVM1.

pots:
- scroll up/down
- scroll left/right (variable capacitor)
- patch select
- (a/b) height-pass filters (in color a HDR type of effect)
- (a/b) brightness adjust
- wiper
- audio input volume control

buttons:
- patch select.

switches:
- true bypass
- sync select (a or none or b)
- black and white /color
- fake progressive / interlaced
- (a/b) lowpass/normal
- (a/b) negative/positive
- (a/b) highpass/midpass

Connections:
- 1 audio in.
- 2 video in.
- 1 video out.

Device: 130,- euro.
Kit: 80,- euro.
PCB: 20,- euro.

shipping depends (between 8,- and 24,- euro).

DEP2b

- kit with all parts: 69,- euro.
- kit without potentiometers and without knobs: 55,- euro.
- PCB with preprogramed atmega328 chip: 17,- euro.
- build: 110,- euro.
- build with PCB back panel: 125,- euro.

shipping costs depends on country.

specs:
- 8bit DAC.
- 8bit ADC.

connections:
- 3 CV inputs (0 to 5V, clipt)
- power 9V DC minus in the center. (works best with BOSS stabilized power supply).
- audio in 1/4 jack.
- audio out 1/4 jack.

effects:
- audio threshold sample loop forward
- audio threshold sample loop forward backward
- audio threshold delay sample loop forward
- audio threshold delay sample loop forward backward
- audio threshold sample loop arpeggio pitch shift forward
- audio threshold sample loop arpeggio pitch shift forward backward
- audio threshold sample loop time stretch forward
- audio threshold sample loop time stretch forward backward

switches:
- true bypass.
- low frequency cut after DAC.

buttons:
- hold.
- feedback.
- cut audio input.
- sample now
- sample rate divide

leds:
- audio input volume.
- audio input trigger active.

potentiometers:
- (small white 1) sample rate divide.
- (small white 3) sample length or pitch sequence select.
- (small white 1) variable.
- (small yellow 1) audio threshold.
- (small blue 1) resonance low-pass filter.
- (small blue 2) low-pass filter.
- (big white 1) DAC volume.
- (big white 2) output volume.

link:
assembling instructions
documentation

Analog-Hard-Disk-2

Analog HD 2

A kit will cost 32,- euro (does not include a hard disk).

The Analog HD2 nr 2 is 110,- euro (cheaper because of small dent in HD).
The Analog HD2 nr 3 is 128,- euro.

More info about this device can be found here

shipping costs: ask.