::::GVS1b Manual:::: For software version: GVS109 (27 JAN 2012) :ABOUT The GVS1 is a video sampler with 1 bit resolution, and can capture 20 frames of video. It will always need a video input connected, because it uses the inputed video signal to sync to. :NTSC/PAL On powerup if you hold down the S button you will switch between NTSC or PAL mode. You only have to do this one time, the change will be stored and it will stay in the mode you selected. :CONNECTIONS (Looking at the GVS in such a way that you can read the letters on the buttons) - The left RCA jack is the video output. - The right RCA jack is the video input. - The small 3.5mm jack in the audio input/trigger input (only positive voltages, no CV, 12V DC max). ::BUTTONS ||: Pause 0: Rec <: Backward >: Forward <+>: Forward and Backward E+||: Invert E+<: Scroll left E+>: Scroll right E+<+>: Reset scroll E+0: Record inverted. S+<: Slower S+>: Faster H+<: Reset to frame 0 momentary H+>: Reset to frame 0 holding H+||: Hold at position H+0: Record all frames ::DIP SWITCH 1: (when on) E permanently on 2: (when on) S permanently on 3: (when on) H permanently on 4: (when on) || connected to audio input 5: (when on) 0 connected to audio input 6: (when on) < connected to audio input 7: (when on) > connected to audio input ::SWITCHES SWITCH Big slide Video bypass Small toggle Lowpass filter on video signal ::POTENTIOMETERS LEFT: Video thresshold RIGHT: Audio input volume